These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 6mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 6mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 6mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 6mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 6mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Designs are made from heat-treated tool steel and are rated for use on stainless steel.

Tool Size: 12.5mm Square Tool

Impression Size: 7mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Designs are made from heat-treated tool steel and are rated for use on stainless steel.

Tool Size: 12.5mm Square Tool

Impression Size: 8mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 7mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 8mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 8mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 8mm

Quantity Included: 1 Stamp

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

Manufactured in the USA, these metal stamps will make a lasting impression on your jewelry. These professional quality stamps are manufactured to the highest standard for durability and alignment. Designs are made from 01 tool steel and then hardened to last project after project.

Tool Size: .375 inch

Impression Size: 7mm

Quantity Included: 1 Stamp

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm and 6mm

Quantity Included: 3 Stamps

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm and 6mm

Quantity Included: 4 Stamps

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.

These quality Supply Guy design metal stamps will make a lasting impression on your jewelry and are manufactured to the highest standard for durability and alignment. Design stamps are made from heat-treated tool steel and are rated for use on stainless steel.

Impression Size: 5mm and 6mm

Quantity Included: 5 Stamps

Features: Rated for Use on Stainless Steel and on a Square Shank

Design stamps can be tricky so for best results follow these simple steps:

1. Practice on cheaper metal before using higher end metals like Sterling Silver or Gold Filled.

2. Make sure there is no padding under your bench block.

3. Make sure you are working on a stable table.

4. Use a steel faced or brass hammer which weighs at least 1-2 pounds depending on the complexity and size of the design.

5. Hit the stamp more than once, but hold it steady making sure you don't shift at all between hits.